PXI Systems Alliance
PXI Systems Alliance
Skip Navigation LinksHome > Products


Filter Products
Audio test modulesPXIdirect PXIdirect offers a broad range of PXI and PXIe components from manufacturers like ADLINK, CHROMA, ZTEC, TABOR, RACAL-EADS, DIGALOG, SIGNADYNE and MAC-PANEL. Find here modules for audio test applications.
Audio test modulesPickering Interfaces Pickering Interfaces offers a range of modules for the generation and conditioning of audio signals found in test systems. The 41-620 is three channel function generator capable of generating signals to 10MHz. A range of attenuator and amplifier solutions supports the management of high voltage audio signals to ensure they can be sourced or measured by PXI systems. Pickering Interfaces can also supply a range of third party PXI solutions.
Audio Test ModulesNational Instruments National Instruments provides audio test solutions for both analog and digital audio based on the PXI platform. By combining high-performance hardware with application-specific audio test software, engineers can quickly configure common audio measurements such as frequency response, THD, SINAD, and much more.
Audio test modulesApplicos Applicos offers two PXI dual-channel 24-bit differential audio test instruments:

PG24192 24-bit dual-channel Generator
• 24-bit resolution
• 1-192kSps data rate
• 125 dB THD
• Three analog filters
• Differential outputs

PD24222 24-bit dual-channel Digitizer
• 24-bit resolution
• 1-222kSps capture rate
• 114dB THD
• Two analog filters
• Differential inputs
Audio test modulesADLINK Technology PXI-9527 DSA module
• 2-CH 24-Bit 432 KS/s High-Resolution Dynamic Signal Acquisition and Generation for PXI bus
• 24-Bit Sigma-Delta ADC and DAC
• 432 KS/s maximum sampling rate with software programmable rate
• Multi-Module synch with 10 MHz clock, PXI Star Trigger, and PXI trigger buses
Automotive test modulesPickering Interfaces The 41-500 is designed to support all of the major protocols in the industry. In addition, as new protocols become standard or variations on existing protocols are required, plug-in hardware additions can be added.

The 41-500 can support up to 10 channels in total. Protocols supported include CAN or J1850 and their variations and 13 different types of UART based protocols
Automotive Test modulesNational Instruments NI CAN, LIN, and FlexRay interfaces provide connectivity to automotive and embedded networks for sending, receiving, monitoring, logging, and simulating frame and signal data. Tight integration with the NI hardware and software platform
enables a wide variety of automotive applications in many different environments.
Automotive Test ModulesInterlatin Being an active part of the Automotive manufacturing Mexican industry for more than 10 years, Interlatin has started to leverage all the knowledge gathered in this time to create their own PXI Automotive Series. The family consists now of different CAN and LIN modules with a CAN-FD coming early 2016.
Automotive test modulesGOEPEL electronic PXI 61x (Series 61) is a programmable communication controller for CAN, LIN, K-Line and FlexRay. All communication resources of Series 61 are supported by a powerful PowerPC in combination with an extensive on-board firmware. - Complex and CPU-intensive processes can be swapped to the board - The PXI plug-in card can be utilised in a CompactPCI™- or in PXI™ system - On-board functions for DDP, BAP, CCP and J1939
Avionic ModulesNational Instruments National Instruments offers PXI interface modules for MIL-STD-1553 and ARINC 429 buses for military and aerospace avionic applications through the company’s collaboration with Avionics Interface Technologies (AIT), a leading provider of avionic instrumentation.
Avionic modulesData Device Corporation DDC’s MIL-STD-1553 data bus PXI interface cards feature high channel counts and multi-function capability (BC + Multi-RT + MT) for in-depth MIL-STD-1553 Testing, Simulation, and Integration. DDC’s ARINC 429 PXI cards offer up to 36 ARINC 429 Channels that can be individually programmed for Transmit/Receive functionality with parametric test features, variable output voltage, and voltage monitoring on board, providing an optimal solution for both commercial and military test applications. DDC also offers multi-I/O cards featuring both MIL-STD-1553 and ARINC 429 together on one card for use in systems that interface to both 1553 and 429.
Avionic modulesAIM GmbH AIM is offering the most complete and capable range of PXI based Test & Simulation modules for MIL-STD-1553A/B, STANAG3910/EFEX, ARINC429 and AFDX/ARINC664P7 Avionics Standards. Each module features a Common Core Architecture, an onboard application support processor, multiple bus interface unit processors, generous onboard memory and an IRIG-B time code encoder/decoder to provide uniform flexibility to meet a variety of demands.

- Field proven, tried and trusted solutions
- Latest Technology – highest Quality – great Performance
- Comprehensive Driver Software and optional PBA.pro Databus Test & Analysis Software
Avionics ModulesVTI Instruments VTI Instruments offers PXI-hybrid based test and simulation modules for MIL-STD-1553 and ARINC429 avionics buses. Up to 32 ARINC429 channels or 4 dual-redundant 1553 channels are possible on a single-slot PXI-H module.
Avionics ModulesAvionics Interface Technologies Avionics Interface Technologies' offers PXI test instrumentation for MIL-STD-1553, ARINC 429, ARINC 664/AFDX, Fibre Channel, and MIL-STD-1760E1760. Coupled with our Software Development Kits (SDK) and intuitive GUI software, these modules provide complete Test & Simulation solutions with advanced features, such as:
• Accurate data logging with precise time-stamping (sub µSec precision)
• Time Synchronization via instrumentation backplane clocks (e.g. PXI 10MHz clock) and IRIG-B
• Synchronization with external equipment via external trigger inputs/outputs
BERTs (Bit Error Ratio Testers)Keysight Technologies The Keysight PXI modules (formerly Agilent Technologies Electronic Measurement Group) address the test of photonic and conventional components in the telecommunications, data communications and computing markets for bit error rate, eye diagram analysis, mask and jitter testing. For the manufacturing industry, this solution combines a modular Bit Error Ratio Tester (BERT) and a Digital Communications Analyzer (DCA), providing a very wide bit rate coverage for bitrates up to 10.3125 Gb/s.
BERTs (Bit Error Ratio Testers)GOEPEL electronic SCANFLEX Controller for PXI Bus - with integrated TAP Transceiver - for Fixture Applications - Compact Version 4TAP (C4-FXT)
Boundary Scan controllersMarvin Test Solutions NX5300: The NX5300 is a single slot 3U PXI device and interfaces to the unit under test via an On-Chip Debug (OCD) or JTAG port. The NX5300 is a high performance JTAG based background debug mode (BDM) diagnostic system designed for functional test, development, programming and troubleshooting of microprocessor and microcontroller based embedded processor systems.
Boundary Scan controllersJTAG Technologies JTAG Technologies has the industry's most reliable boundary-scan controllers, specifically designed by us for high throughput and the utmost in signal integrity.
- 4 Test Access Ports (TAPs)
- Programmable voltages
- JT2147/DAK for MAC Panel Scout available
Boundary Scan controllersGOEPEL electronic The PXI 5396 Digital I/O module with 96 channels, based on GÖPEL electronic’s CION™ component. 3U/1Slot instrument, six groups of 16 channels each are voltage programmable between 1.8 and 4,5 V. - 96 test channels are subdivided into six groups with 16 channels each - Unstress feature - combination of structural Boundary Scan tests and functional tests with up to 100 MHz clock rate - VarioCore® technology integrated
Bus Extension InterfacesVTI Instruments VTI Instruments offers cabled PCI Express bus interfaces which provide a high-bandwidth, low-latency link between PXIe mainframes and host PC.
Up to 5.6 GB/s practical throughput is achievable. Multiple chassis can be daisy chained to a common host.
Bus extension interfacesPXIdirect PXIdirect offers a broad range of PXI and PXIe components from manufacturers like ADLINK, CHROMA, ZTEC, TABOR, RACAL-EADS, DIGALOG, SIGNADYNE and MAC-PANEL. Find here a 3U PXI Extension Card - Model 52906 - for Servie and Maintenance - hot swappable.
Bus extension interfacesPickering Interfaces Pickering Interfaces provides a range of bus extension interfaces to allow test systems to extend beyond a single PXI chassis.
Bus extension interfacesNational Instruments National Instruments offers bus extension interfaces that allow direct PC or laptop control of PXI or PXI Express systems. Options range from low-cost (x1 PCIe) to high-performance (x16 PCIe) interfaces. NI also provides bus extension interfaces that utilize fiber-optic cables for electrical and physical isolation and products for daisy-chaining multiple chassis to the same host computer.
Bus extension interfacesMarvin Test Solutions MXIe-Express Series.
The MXIe PXI-Express Bus Expanders allows for direct control of PXI-Express systems from any PCI Express slot in a desktop computer or server. MXIe-Express configurations are available for supporting both the x1 and x4 PCI-Express lane configurations. Either lane configuration can remotely control one or two PXIExpress chassis. The MXIe-Express technology utilizes a highbandwidth link that is transparent to software applications and drivers, providing the ability to use high performance desktop computers or servers to control PXI-Express systems.
- 192 or 798 MB/s data rate
- Cabling up to 7 meters
- Rugged connectivity
Bus extension interfacesGOEPEL electronic The PXI 3080 multi-bus controller provide MOST25 interfaces with their own micro controller for the data transfer in MOST networks and can be utilised in a CompactPCI™- or in PXI™ system. - 4 Ports (4 x digital input, 4 x digital output) - 1 x J1850 with freely configurable transceiver - All interfaces galvanically isolated

Member Company